Skip to content
KitProbe

Laptop battery health check

A browser can't measure battery health, but Windows can. Run one command on the laptop and this page reads the result, or type in the two numbers yourself.

Before you start

  • Use a report created today, on this laptop.

Read the Windows battery report

  1. On the laptop, press Windows + R, type cmd and press Enter.
  2. Paste this command and press Enter: powercfg /batteryreport
  3. Choose the file it created. In the file window, type %USERPROFILE% in the address bar to jump to it.

The file is read in this browser only and never uploaded. It contains the computer's name and usage history.

Calculate from the numbers

mWh or Wh, as shown in the report or system settings.

On a Mac, System Settings → Battery → Battery Health shows the maximum capacity directly.

How did it go?

Saved on this laptop for one hour, so the run-all-tests page can collect it. Tap your answer again to clear it.

Next test: Touchpad test

Why two numbers matter

Design capacity is what the battery held when new. Full charge capacity is what it holds today. Health is the second divided by the first. A laptop that "lasts all day" in the ad and shows 55% here won't.

What's normal for a used laptop

  • 80% or more: healthy. Most 2–4-year-old business laptops land here if they were looked after.
  • 60–80%: worn. Fine plugged in at a desk, shorter on the go. Negotiate.
  • Below 60%: plan a replacement and take its cost off the price.

The cycle count helps too: many laptop batteries are rated for roughly 300–1,000 full cycles. These are rules of thumb, not manufacturer guarantees.

Buying used: what to watch for

  • Ask for a fresh report, run in front of you. A screenshot sent days earlier could come from another laptop.
  • Some ThinkPads (like the T480) have two batteries. This page adds them up.
  • A swollen battery is a safety problem, not a price point: a bulging touchpad or a case that rocks on the table means walk away or replace it immediately.

How to find the cycle count

  • Windows: in the battery report, the Installed batteries table has a Cycle count row. Some laptops leave it blank; the health percentage still works without it.
  • Mac: hold Option, click the Apple menu, choose System Information → Power and look for Cycle Count. Apple designs recent MacBook batteries to keep up to 80% of their capacity at 1,000 cycles.

Read the two numbers together:

  • Many cycles, good health: a battery that was looked after. Fine.
  • Few cycles, low health: the battery is old, or was kept hot or at 100% all the time. Expect it to keep dropping.
  • Cycles near the battery's rating: even with decent health today, plan for a replacement soon.

FAQ

How do I check battery health on a Mac?

Open System Settings → Battery, then the info button next to Battery Health. It shows the maximum capacity as a percentage, and you can use that number directly.

Is there an easier way on Windows?

The maker's app often shows it too: Lenovo Vantage, Dell's power app or HP Support Assistant. The Windows battery report is the same on every brand, which is why this page reads it.

What is a battery cycle?

One full charge's worth of use, even if spread over several days. A battery with few cycles and low health may have been kept hot or at 100% all the time.