Skip to content
KitProbe

Touchpad test

Check every touchpad gesture, and draw across the whole surface to find dead spots.

Before you start

  • Use the touchpad, not a mouse.
  • Draw slowly across the whole box, edge to edge.

Use the touchpad inside this box

  • Click
  • Right-click (two-finger tap or right button)
  • Double-click
  • Scroll up/down with two fingers
  • Scroll sideways with two fingers
  • Click and drag
  • Pinch to zoom

Pinch isn't reported by every browser; skip it if it never lights up.

How did it go?

Saved on this laptop for one hour, so the run-all-tests page can collect it. Tap your answer again to clear it.

Next test: Charging port test

How to use it

  1. Move your finger slowly over the whole touchpad while the pointer is inside the box. The trail shows where the pointer went.
  2. Try each gesture in the list. Each one turns green when the browser sees it.
  3. Look at the trail: gaps, jumps or a pointer that stops in one area mean a dead spot.

What a problem looks like

  • Jumpy or broken trail in the same place every time: a dead zone on the touchpad.
  • Click doesn't register or needs a hard press: a worn click mechanism.
  • Two-finger scroll does nothing: often a driver setting, not hardware. Check the touchpad settings before blaming it.

Buying used

  • Press the physical buttons (ThinkPads have three above the touchpad) and check they click evenly.
  • A touchpad that's raised or doesn't sit flat can mean a swollen battery underneath. That's a safety issue: don't buy it as is.

FAQ

Why isn't pinch detected?

Firefox doesn't report pinch gestures to web pages. Use Chrome, Edge or Safari for that one.

Two-finger scrolling goes the wrong way. Is it broken?

No. That's the natural (or reverse) scrolling setting, which you can change in the touchpad settings.

Can I test a mouse with it?

Clicks, double-click, scrolling and drag work with a mouse too. The pinch and dead-spot checks are meant for touchpads.