Skip to content
KitProbe

Dead pixel and screen test

Fill the screen with solid colours to find dead or stuck pixels, lines, blotches and light leaking from the edges.

Before you start

  • Wipe the screen with a soft cloth.
  • Turn the brightness all the way up.

How did it go?

Saved on this laptop for one hour, so the run-all-tests page can collect it. Tap your answer again to clear it.

Next test: Refresh rate test

How to use it

  1. Clean the screen gently with a soft cloth. Dust looks a lot like a dead pixel.
  2. Press Start screen test. The page goes fullscreen and shows one colour at a time.
  3. Click or press → to move to the next colour. Look closely at each one, corner to corner.

What a problem looks like

  • Dead pixel: a dot that stays black on every colour.
  • Stuck pixel: a dot that stays red, green, blue or white.
  • Backlight bleed: light leaking from the edges on the black screen. A faint glow is common; bright patches aren't.
  • Lines or blotches: vertical or horizontal lines, or cloudy patches, usually mean a damaged panel or cable.

Buying used: what to look for

  • Run the test with the brightness at maximum.
  • Open and close the lid slowly while the white screen is showing. Flicker or lines that come and go point to a worn display cable.
  • A new screen is one of the most expensive repairs on a laptop, so factor any defect into the price.

FAQ

Can a stuck pixel be fixed?

Sometimes. A stuck pixel (always one colour) can recover on its own or after hours of flashing colours. A dead pixel (always black) is permanent.

How many dead pixels are acceptable?

Makers' warranty rules allow a few, but on a used laptop any pixel you notice in normal use is a reason to negotiate. One near the middle of the screen bothers most people.

Does it work on an external monitor or a phone?

Yes. Open the page on that screen and start the test. It works in any modern browser that supports fullscreen.